Basic Kettle Conversion Kit – Brass
$10.82
In stock
Same Day Shipping
Order before 2:00 pm EST (M-F)
- Details
- Features
No Weld Homebrew Kettle Valve Conversion Kit- C218
A full kit for adding to your current kettle to transfer brew. No welding is required. A ball valve is available with just a 7/8″ drill hole needed to accommodate the bulkhead connector. You can now proceed after connecting a hose to the barbed end.
Particularly made to adapt homebrewing beer equipment. This top-notch valve is a fantastic option for shutting and regulating applications. They are simple to disassemble and clean. With the aid of this conversion kit, it is simple to install a brass valve in the bottom of a kettle.
As a result, you may quickly and safely pour hot wort from your brew kettle into the fermentation container without using a wort chiller. The nicest feature of this kit is that it doesn’t even require welding. enables safe and simple emptying of hot wort.
Also needed: 1/2″ Kettle Conversion Kit Coupling, SS 304 (C167)
Features:
- Metal is brass.
- Adapts any kettle quickly and without welding.
- A 7/8″ hole saw step drill, hole punch, and pliers are all that is required.
- Enables you to quickly and safely pour hot wort from your homebrewing kettle.
- Very simple to use and install.
- They hold up well and still operate well after several cycles.
- They are simple to maintain and run.
Warnings / Instructions
- Important information – Prop. 65 for CA Residents. Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
- Metal is brass.
- Adapts any kettle quickly and without welding.
- A 7/8″ hole saw step drill, hole punch, and pliers are all that is required.
- Enables you to quickly and safely pour hot wort from your homebrewing kettle.
- Very simple to use and install.
- They hold up well and still operate well after several cycles.
- They are simple to maintain and run.
You may also like
Related products
