3-3/4″ Glass Rinser Subassembly for Drip Tray

3-3/4″ Glass Rinser Subassembly for Drip Tray

The glass rinser is installed with water supply and drain connections. The spray assembly is our primary focus. Invert the glass over the stainless steel disk and press the glass downwards. This activate the sprayer and rinses the glass with high pressure jet stream. Constant regular use can damage the plate. A simple Glass Rinser subassembly for drip tray such as this is all that you’ll need to use it again.Place a glass rinser handy on your bar counter. Rinsing the glass with cold water before pouring the drink. This cools the glass down and reduces friction. This in turn reduces the risk of excessive foaming while pouring beer from the draft beer system.

Replacement sprayer for Glass rinsers. High pressure jet stream for all drinkware.
Press the sprayer disk plate downwards with the inverted glass to rinse all over.

• Used in glass rinser drip tray C360.
• Rinses away impurities that might be in the grass.
• A wet glass pours better.
• Stainless steel rinser plate instead of the usual star.
• Brushed finish
• Rinsers save time and improve the work efficiency
• Inlet male thread size: 1/2” BSP
• Outlet drain thread size: 5/8”-18
• All rinsers are NSF- certified.