Pro Water Station – Stainless Steel Gooseneck Tap with Glass Rinser Drip Tray, 14″ x 9″ Flush Mount

Brushed stainless steel flush-mount drip tray with a center-spray glass rinser and a matching gooseneck water tap. Rinsing glasses with cold water before pouring gives a cleaner glass and a better pour. Built for bars, tasting rooms, restaurants and home beverage setups.RInser is NSF certified.

What’s Included

Everything needed to connect the tray’s drain and glass rinser is supplied with the product.

• Stainless steel flush mount drip tray, 14″ x 9″
• Drain assembly (drain elbow) fitted to the tray
• Glass rinser spray assembly fitted to the tray
• Removable grill (jali)
• 32 mm flexible white corrugated drain pipe
• Worm clamp (18–31 mm)
• Clamp and clamp bolt
• PP water pipe (3/8″) with 1/2″ BSP female adapter for the glass rinser
• Gooseneck water tap (RO tap deck)
  

  Additional Items You Need

  Please arrange these before installation:

  Connection	What you need
  Gooseneck tap water supply	1/4″ (6.35 mm) OD tube for the 1/4″ push-fit connector
  Water source	Tee, valve or adapter to connect your cold water line to the included rinser pipe and the tap tube
  Thread tape	PTFE (Teflon) tape

Installation Guide

Tools needed: marker, tape measure, jigsaw or hole saw for the countertop, adjustable spanner, screwdriver, PTFE tape.

1. Mark and cut the opening in the countertop to the cut-out size given in the product’s cut-out sheet. Keep the edges clean.
2. Place the tray. The drain elbow and glass rinser come fitted on the tray. Lower the tray into the opening, so the 14″ x 9″ lip sits flush on the counter.
3. Connect the drain. Push the included 32 mm corrugated pipe onto the drain elbow barb, secure it with the included worm clamp, and route it to your waste drain with a continuous downward slope.
4. Connect the rinser water supply. Attach the included PP pipe, with its 1/2″ BSP female adapter, to the rinser shank under the tray, then connect its free end to your cold water line. Use PTFE tape on the threads and do not over-tighten the brass.
5. Connect the gooseneck tap by pushing the 1/4″ tube into its 1/4″ push-fit connector.
6. Place the grill (jali) in the tray, turn the water on slowly, and check for leaks at the drain, the rinser and the tap.

Care & Maintenance

• Remove the grill and wash it with warm soapy water.
• Wipe the stainless steel along the grain with a soft cloth.
• Avoid bleach, steel wool and abrasive pads, as they can mark the brushed finish.
• Rinse the drain regularly to prevent buildup.

FAQ

Does it need a plumber?
Basic DIY skill is enough for the tap push-fit. For the drain and water connections, a plumber is recommended.

Are pipes included?
The drain pipe with clamp and the rinser water pipe are included. You need to arrange 1/4″ tube for the tap and a fitting to connect to your cold water line, see the sizes above.

Is it for cold water only?
The recommended use is rinsing glasses with cold water.

Is a 16″ x 7″ size available?
Yes, a 16″ L x 7″ W option is available as part number C848 in brushed stainless.