3″ Column- 1 Faucet – SS Polished – Glyco Cold Technology

Same Day Shipping
Order before 2:00 pm EST (M-F)
- Details
- Features
- Specifications
1 tap 3″Column tower SS Polished -C569
Column towers are the most basic draft beer dispensers, the ones we refer to as Classic. While they come without any fancy design, these draft beer towers go by their mandate of protecting the beer lines from exposure and directing beer dispensing through faucets perfectly.
This is a 3” Column tower with a single beer faucet.
With SS polished finish and Glyco-cold beer cooling technology, this tower meets all your requirements.
Beer TAPS:
Pour your beer with perfection with our beer taps. Draft beer is a beer that’s “on tap,” as opposed to bottled. Next time you’re at a bar or a restaurant with a bar, look for a row of labeled levers. The beers on tap are fresher than the bottled selection.
In Our 1 tap 3″Column tower SS Polished, we use Brass Taps with rich-grade plastic knobs.
Air-Cooled Technology:
Air-cooled technology is best for beer dispensing in short runs. This system cannot maintain the required beer pouring temperature over long distances. This setup drives Cold air from the cooler to the beer tower. Also runs alongside the beer lines and keeps them cool. Air Cooled draft beer towers are commonly found on Kegerators, Home, and Commercial Bars. Place the tower close to a static or forced cold air source.
- Standard US Faucets & Knob.
- All mounting hardware & gasket.
- 100% Stainless Steel Contact with Beer.
- Copper tubing has two-point contact with a cold block which is closer to the shank and towards the tap for quick cooling transfer
- Three Level Sealing with specially designed shank
- Specially designed Brass Cold Block for Optimum Cooling at the point of dispense.
- Cold Block designed for more contact with copper recirculation pipe.
Material | Stainless Steel 304 |
Finish | SS Polished, |
Cooling system | Glyco Cold Technology |
Mounting system | With Screw |
Outlet | SS Tube |
Height | 12" |
Number of faucets | 1 |
FAUCET MATERIAL | Stainless Steel 304 |
Inlet Connection | 1/4" OD Stainless Steel Pipe with 1/4"-3/8" Barb Fittings |
Glycol Connection | 3/8" O.D. Copper tubes with 3/8" barb fitting |
Column Diameter | 3" |